Simple way to set up your Bottle Stoppers for turning. Drill a 1/2in hole in your blank. Glue in the insert and you are ready to mount your blank to the bottle stopper chuck. 4 inserts per package.
1" X 8 TPI Lathe threads. Bottle stopper threads are 3/8 X 16 TPI
Used for most bottle stopper kits
Click on image for larger view
This tap set allows you to tap a hole to create a bottle stopper project in wood or acrylic and includes a 5/16" drill bit. Drill the hole in the bottle stopper blank with the included 5/16" drill bit. Then, using firm and even pressure, tap the threads into the hole with the 3/8"X16tpi tap.
Bottle Stopper Chuck: PK-BS1-MJDrill Bit: 5/16"
Plain and simple but with elegant straight lines, This is our most popular bottle stopper.
Click on image for More Info
Bottle Stopper Chuck Set. Item: PK-BS1-M or MJ
7mm Drill: DRILL7Stopper Bushing: BS11GSBU
Gear Style Bottle Stopper
Making a bottle stopper is now as easy as drill, tap, mount and turn.
In stock & ready to ship
Bottle Stopper Chuck: PK-BS1-M
An easy project and an exceptional value. Stopper fits over larger diameter end of a stepped wooden dowel and the rubber is held in place by friction. Smaller diameter end of the dowel is glued into a turned blank with 23/64" hole. We sell these as each. If you don't need ten then get them here.
Copyright Wood-N-Whimsies 2003